德升科技——水式模溫機

水式模溫機

Water mold temperature controller

特點

A.提高成型效率:

1.成型前，DSW自動控制模溫，迅速達到所需的溫度且始終保持恒溫，減少模具預熱所需之工時。

2.可持續操作而無模具溫度過高之慮，而途中停機也不致因模具溫度降低而需等待升溫，因此可提高生產效率。

B.提高產品品質：

1.塑料有熱脹冷縮的物理特性，因此若模溫不穩定或控制不當，會產生成型品夾水紋，縮水, 扭曲變形及表面光澤不良等現象，而使用DSW機型即可解決此類問題。

2.能使模具保持適當溫度，大幅減少試模次數及降低成型品不良率,確保產品品質。

C.結構特性：

1.可根據需要任意選擇以水或熱媒油當傳熱介質。

2.選擇配備的PID智能型自動演算的溫度控制器，能準確顯示和控制模具溫差所需溫度±1℃內。

3.兩段式加熱結構設計，可視所需之溫度增減電力，并配合特殊之發熱構造，可省時省電。

A. Improve molding efficiency:

1. Before molding, DSW automatically controls the mold temperature to quickly reach the required temperature and maintain a constant temperature, reducing the time required for mold preheating.

2. Continuous operation without the concern of excessive mold temperature, and no need to wait for the temperature to rise due to the drop in mold temperature when stopping on the way, so the production efficiency can be improved.

B. Improve product quality:

1. Plastic has the physical properties of thermal expansion and contraction, so if the mold temperature is unstable or improperly controlled, there will be water marks, shrinkage, distortion and poor surface gloss of the molded product, and the use of DSW models can solve this problem. class problem.

2. It can keep the mold at an appropriate temperature, greatly reduce the number of mold trials and reduce the defective rate of molded products to ensure product quality.

C. Structural characteristics:

1. Water or heat medium oil can be arbitrarily selected as heat transfer medium according to needs.

2. Select the temperature controller equipped with PID intelligent automatic calculation, which can accurately display and control the required temperature of the mold temperature difference within ±1 °C.

3. The two-stage heating structure design can increase or decrease the power according to the required temperature, and with the special heating structure, it can save time and electricity.

安全保護系統：

1.電源缺相和逆相保護及指示燈

2.發熱圈過載保護

3.泵蒲過載保護及指示燈

4.溢油保護和預留接

5.碟閥式設計,操作和保養絕對安全

6.泵蒲反轉保護及指示燈

7.缺媒介蜂鳴器警報保護及指示燈

8.內置超高溫保護及溫控器

9.自動回油裝置和預留接口,換模時干凈和不浪費

10.防爆式油路設計,操作和保養絕對安全

Safety protection system:

1. Power phase loss and reverse phase protection and indicator lights

2. Heating coil overload protection

3. Pump overload protection and indicator light

4. Oil spill protection and reserved connections

5. Butterfly valve design, operation and maintenance are absolutely safe

6. Pump reverse protection and indicator light

7. Lack of media buzzer alarm protection and indicator light

8. Built-in ultra-high temperature protection and thermostat

9. Automatic oil return device and reserved interface, clean and no waste when changing molds

10. Explosion-proof oil circuit design, operation and maintenance are absolutely safe