德升科技——油式模溫機

油式模溫機

Oil mold temperature controller

特點 Features

1.使用溫度為200℃。

2.高流量，高壓力設計，減少溫差。

3.本機配備的PID智能型自動演算的溫度控制器，能準確顯示和控制模具溫差于所需溫度±1℃內。

4.兩段式加熱結構設計，可視所需之溫度增減電力，并配合特殊之發熱構造，可省時省電。

1. The operating temperature is 200°C.

2. High flow, high pressure design, reduce temperature difference.

3. This machine is equipped with PID intelligent automatic calculation temperature controller, which can accurately display and control the mold temperature difference within ±1℃ of the required temperature.

4. The two-stage heating structure design can increase or decrease the electric power according to the required temperature, and cooperate with the special heating structure, which can save time and electricity.

安全保護系統

1.發熱圈過載保護

2.泵蒲過載保護及指示燈

3.溢油保護和預留接

4.碟閥式設計,操作和保養

5.泵蒲反轉保護及指示燈

6.電源缺相和逆相保護及指示燈

7.缺媒介蜂鳴器警報保護及指示燈

8.內置高溫保護及溫控器

9.自動回油裝置和預留接口,換模時干凈和不浪費

10.防爆式油路設計,操作和保養

safety protection system

1. Overload protection of heating coil

2. Pump overload protection and indicator light

3. Oil spill protection and reserved connections

4. Butterfly valve design, operation and maintenance

5. Pump reverse protection and indicator light

6. Power phase loss and reverse phase protection and indicator lights

7. Lack of media buzzer alarm protection and indicator light

8. Built-in high temperature protection and thermostat

9. Automatic oil return device and reserved interface, clean and no waste when changing molds

10. Design, operation and maintenance of explosion-proof oil circuit